Algae Dozers Instructions

The Algae Dozer Pad is designed to scrape off hard coralline
algae from Acrylic or Glass Reef Tanks.

Instructions

Take the regular Algae Scrub Pad off the inner
half (wet-side) of your pair of Mighty Magnets, and replace it
with the Algae Dozer scraper pad by centering the magnet on
the back side of the Dozer Pad. The gray plastic scraper part
of the Dozer Pad will be facing toward the aquarium surface.
Place the inner half of your Mighty Magnets in the aquarium
and start to clean as you would normally with the regular scrub
pad following the Mighty Magnets instructions.

Caution

Always clean, inspect and test any algae pad before
use in an inconspicuous area of the aquarium, to insure it does
not scratch the surface, even when using new pads. Be sure to
watch carefully as you scrape off the coralline algae so as not
to scratch the aquarium from coralline build-up. Rinse and
clean the algae pads after each use.
You may attempt to re-sharpen your Dozer Pad for extended
use. Customers have done this using fine sandpaper or you can
try dragging a straight edge razor blade along the pads’ plastic
scraper blade.

(203)-885-0597 Sales@mightymagnets.com